Key Specifications/Special Features:

• Operating temperature: -55 to 125 degrees Celsius
• Capacitance range: 0.1 to 330uF
• DC leakage current (20 degrees Celsius): Io<=0.02CRUR or 1uA (whichever is greater)
• Io <=0.01CRUR or 0.5uA (special order)
• Dissipation factor (20 degrees Celsius): see below table
• Temperature performance: see below table
• Climatic category: 55, 125 and 10
• Life test: 1,000 hours
• Cap, capacitance change (%), maximum DF (%), maximum DCL (uA)
• (uF) -55, +85, +125, -55, +20, +85, +125, +85 and 125 degress Celsius
• <=1.0, -10, +15, +25, 6, 4, 6, 6, 10Io and 12. 5Io
• 1.5 to 68, -10, +15, +25, 8, 6, 8, 8, 10Io and 12. 5Io
• 10 to 68, -10, +15, +25, 10, 8, 10, 10, 10Io and 12. 5Io
• 100 to 330, -10, +15, +25, 10, 8, 10, 10, 10Io and 12.5Io
• Lower current leakage and dissipation factor
• Stable frequency and temperature and long life
• Suitable for military and computer, telephone and long life electronic products

Product Certifications:

• Certificate Standard:SGS
  
• Certificate Number:GZSCR041248032/LP.
  
• Issue Date:24-Dec-2004
  
• Certification Agent: SGS -CSTC LTD
  

  

• Certificate Standard:RoHS
  
• Certificate Number:CQC06130017473
  
• Issue Date:08-Sep-2006
  
• Expiry Date:07-Sep-2007
  
• Certification Agent: China Quality Certification Centre
  

Key Specifications/Special Features:

• Climatic category: 40, 85 and 21
• Rated voltage: 100, 160, 250, 400 and 630V
• Capacitance range: 0.01 to 10.0uF
• Voltage resistance: 1.4UR (5s)
• Dissipation factor (1kHz): ≤ 1.0% (20C, 1kHz)
• Insulation resistance: CR ≤ 0. 33uF ≥ 7,500MQ CR> 0.33uF ≥ 2,500s
• Features:
  • Box-type provides the identical outer appearance
  • Non-inductively would with metalized polyester film as the dielectric, with copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin
  • Wide capacitance range and small size
  • Long life due to self-healing effect
  • Suitable for blocking
  • By-pass and coupling of DC and signals to VHF range
  • Widely used in filter
  • Noise suppression and low pulse circuits

Payment Details:

TMCC02  High volt ceramic capacitor

Key Specifications/Special Features:

• Operating temperature range: -25 to +85 degrees Celsius
• Working voltage: DC 1, 2, 3, 6.3, 10 and 15kV
• Withstanding voltage: 1.5 times of working voltage 1kV<=UR<=10kV
• UT = 1. 5UR+500V, UR >=10kV, UT = 1.5UR
• Capacitance: be measured at 20 +-2 degrees Celsius, with 5Vrms maximum
• Class I 1+-0.2MHz and class II 1+-0.2kHz
• Capacitance tolerance: J: +-5%, K: +-10%, M: +-20% and Z: +80%-20%
• Dissipation factor (DF): same condition as the capacitance
• SL tgd <= 0.15%
• N3300 tgd <=0.4%
• Y5P tgd <=2.5%
• Z5U tgd <=2.5%
• Z5V tgd <=2.5%
• Bn tgd<=0.5%
• Y5R tgd<=0.35%
• Insulation resistance (IR): with rated voltage 500V test 60 +-5seconds
• IR >=10,000MQ
• Temperature characteristic: SLN3300, Y5P, Z5U, Z5V and Y5R

Product Certifications:

• Certificate Standard:SGS
  
• Certificate Number:GZSCR041248032/LP.
  
• Issue Date:24-Dec-2004
  
• Certification Agent: SGS -CSTC LTD
  

   

• Certificate Standard:RoHS
  
• Certificate Number:CQC06130017473
  
• Issue Date:08-Sep-2006
  
• Expiry Date:07-Sep-2007
  
• Certification Agent: China Quality Certification Centre
  

   

TMCE20  Metallized Polypropylene Film Capacitor Axial Type

Key Specifications/Special Features:

• Reference standard: GB10190-88 (IEC 60384-16)
• Climatic category: 40, 85 and 21
• Rated voltage: 160 to 250, 400, 1,000 and 1,200V
• Capacitance range: 0.010 to 30uF
• Capacitance tolerance: +(-)5% (J), +(-)10% (k) and +(-)20% (M)
• Voltage resistance: 1.6Ur (5s)
• Dissipation fartor <=0.1% (20 degrees Celsius, 1kHz)
• Insulation resistance (20 degrees Celsius, 1 minute): >=25,000 (CR<=0.33uF)
• >=7,500s (CR>0.33uF)
• Features:
  • Metallized polypropylene film, epoxy resin coating
  • Low dissipation factor with high frequency
  • Small inherent temperature rise
  • High insulation resistance
  • Good self-healing property
  • Suitable for DC and pulse
  • Suitable for high frequency and high current circuits
  • S-shaping correction of color TV sets

Product Certifications:

• Certificate Standard:UL
  
• Certificate Number:104640001
  
• Issue Date:30-Jun-2004
  
• Certification Agent: Underwriters Laboratories Inc
  

  

• Certificate Standard:SGS
  
• Certificate Number:GZSCR041248032/LP
  
• Issue Date:24-Dec-2004
  
• Certification Agent: SGS-CSTC Ltd
  
• Certificate Standard:RoHS
  
• Certificate Number:CQC06130017473
  
• Issue Date:08-Sep-2006
  
• Expiry Date:07-Sep-2007
  
• Certification Agent: China Quality Certification Centre
  

  

TMCF17 Metallized Polypropylene Film Capacitor

Key Specifications/Special Features:

• Reference standard: GB10190-88 (1CE60384-16)
• Climatic category: 40, 85 and 21
• Rated voltage: 100 to 160, 250, 400 and 630V
• Capacitance range: 0.0047 to 6.8uF
• Capacitance tolerance: +(-)5% (J), +(-)10% (K) and +(-)20% (M)
• Voltage resistance: 1.6Vr (5s)
• Dissipation fartor: <=0.1% (20 degrees Celsius, 1kHz)
• Insulation resistance (20 degrees Celsius, 1 minute): >=25,000 (CR <=0.33uF)
• >=75,00s (CR >=0.33uF)
• Features:
  • Box-type provides the identical outer appearance
  • Very low loss at high frequency, suitable for high current
  • High insulation resistance, long life due to self-healing effect
  • Withstanding high impulse voltage
  • As an across the line type noise suppression capacitor
  • Suitable for AC purpose

Payment Details:

TMCE02 Radial Aluminum Electrolytic Capacitor

Key Specifications/Special Features:

• Operating temperature: -40 to +105 degrees Celsius (6.3 to 100V) -25 to +105 degrees Celsius (160 to 450V)
• Rated voltage: 6.3 to 450V
• Nominal capacitance: 0.1 to 15,000uF
• Capacitance tolerance: +-20% (20 degrees Celsius, 120Hz)
• Leakage current: UR <=100V: I <=0. 01 CR UR (uA) or 3uA (whichever is greater) 2 minutes
• After UR >=160V: I <=0. 03 CR UR +10 (uA) 2 minutes after
• Dissipation factor (25 degrees Celsius, 120Hz):
  • UR (V) 6.3, 10, 16, 25, 35, 50, 63, 100, 160 to 250 and 350 to 450
  • Tgd 0.22, 0.19, 0.16, 0.14, 0.12, 0.10, 0.09, 0.08, 0.15 and 0.20
• Over 1,000uF, 0.02 is added to every 1,000uF increase
• Load life: after applied rated voltage for 1,000 hours at +105 degrees Celsius, at C <=+-25% of initial
• Value, tgd<=200% of specified value, IL <=specified value
• Shelf life: after shelf for 500 hours (without voltage applied) at +105 degrees Celsius, then restored for 24 hours at room
• Temperature: at C <=+-25% of initial value, tgd <=200% of specified value, IL<=specified
• Features:
  • Wide temperature range: -40 to +105 degrees Celsius
  • Voltage range: 6.3 to 450V
  • Stable and reliable performances
  • Suitable for use in electronic circuits for coupling, decoupling bypass and filtering

Payment Details:

Minimum Order:

TMCE15 Axial Standard Aluminum Electrolytic Capacitor

Key Specifications/Special Features:

• Operating temperature: -40 to +105 degrees Celsius
• Rated voltage: 6.3 to 100V
• Nominal capacitance: 0.47 to 10,000uF
• Capacitance tolerance: +(-)20% (M) (120Hz 25 degrees Celsius)
• Leakage current (25 degrees Celsius):
• I <=0. 03 CV+3uA (after 5 minutes application)
• Dissipation factor (tand) (25 degrees Celsius, 120Hz):
• WV, 6.3, 10, 16, 25, 35, 50, 63 and 100
• Tand, 0.35, 0.30, 0.25, 0.25, 0.23, 0.20, 0.20 and 0.20
• Load life:
• After 1,000 hours application of WV at+ 85 degrees Celsius
• Capacitance change: <=+(-)25% of initial specified value
• Dissipation factor: <=+(-)200% of initial specified value
• Leakage current: <=+(-)200% of initial specified value
• Features:
  • Load life 2,000 hours at 105 degrees Celsius
  • Axial standard typ.
  • Case size larger than 6.3mm diameter has safety vent on rubber bun

  Payment Details:

  Minimum Order:
• 10,000 to 19,999 Pieces
  

  Delivery Details:

  FOB Port:
  
• Hong Kong, Shenzhen
  

  Product Certifications:

  • Certificate Standard:SGS
    
  • Certificate Number:GZSCR041248032/LP
    
  • Issue Date:24-Dec-2004
    
  • Certification Agent: SGS-CSTC Ltd
    
  • Certificate Standard:UL
    
  • Certificate Number:E166700/03CA23659
    
  • Issue Date:15-Sep-2003
    
  • Certification Agent: Underwriters Laboratories Inc.
    

    

  • Certificate Standard:VDE
    
  • Certificate Number:40012049
    
  • Issue Date:27-Oct-2004
    
  • Certification Agent: VDE Testing and Certification Institute
    

    

  • Certificate Standard:RoHS
    
  • Certificate Number:CQC06130017473
    
  • Issue Date:08-Sep-2006
    
  • Expiry Date:07-Sep-2007
    
  • Certification Agent: China Quality Certification Centre
    

    

TMCE24  SMD Electrolytic Capacitor

Key Specifications/Special Features:

• Operating temperature range: -40 to +85 degrees Celsius
• Rated working voltage: 4 to 100V DC
• Nominal capacitance range: 0.1 tp 1,500uF
• Capacitance tolerance (120Hz 20 degrees Celsius): +/- 20% (M)
• Leakage current: <= 0.01CRUR or 3uA, whichever is greater (after two minutes application of rated voltage)
• CR: nominal capacitance (uF) and UR: rated voltage (V)
• Dissipation factor (120Hz 20 degrees Celsius):
  • UR (V) 4, 6.3, 10, 16, 25, 35, 50, 63 and 100
  • Tand <= O8, 0.35, 0.26, 0.20, 0.16, 0.14, 0.12, 0.12, 0.12 and 0.10
  • >= O8, 0.35, 0.28, 0.24, 0.20, 0.16, 0.14, 0.12, 0.12 and 0.10
• Load life: after 2,000 hours application of WV at +85 degrees Celsius
• The capacitor shall meet the following limits
• Capacitance change: <= +/- 20% of initial value (4V: within +/- 25%)
• Dissipation factor: <=200% of initial specified value
• Leakage current: <= initial specified value
• Shelf life: after storage for 1,000 hours at +85 degrees Celsius
• Dissipation factor: not more than the initial specified value
• Leakage current: not more than the initial specified value
• Capacitance change: within +/- 10% of the initial value

Payment Details:

Minimum Order:

TMCC03   Radial Multilayer Ceramic Capacitor

Key Specifications/Special Features:

• Capacitance range: 0R5-104
• Insulation resistance: C <=10nF R >=10,000MQC >=10nF C R>=100S
• Withstanding voltage: 2.5 times of working voltage
• Dissipation factor: 0.15% maximum (20 degrees Celsius, 1MHz, 1V DC)
• Rated voltage: 25, 50, 63 and 100V DC
• Capacitance tolerance: B = +-0.1PF, C = +-0.25PF and D = +-0.5PF
• F = +-1%, G = +-2%, J = +-5%, K = +-10% and M = +-20%
• Life test: 200% rated voltage at +125 degrees Celsius 1,000 hours
• Solderability: SJ/10211-91 4.11
• Resistance to soldering heat: SJ/T10211-91 4.10
• Mechanical test: SJ/T10211-91 4.9
• Temperature cycling: SJ/T10211-91 4.12
• Moisture resistance: SJ/T10211-91 4.14
• Termination adhesion strength: SJ/T10211-91 4.9
• Environment testing: SJ/T10211-91 4.13
• Characteristics
• Tape and reel available for auto placement
• Various lead spacings are available

Payment Details:

Minimum Order: